Utilization Rate in Consulting: What It Is, How to Calculate It, and How to Improve It

Utilization rate is the single most important operational metric for a consulting firm. It tells you how efficiently your team's capacity is being converted into billable revenue - and it drives profitability more directly than any other number.

By Morten Fabrin, CEO of SUNAGO Matrix Updated 9 min read

What Is Utilization Rate in Consulting?

Utilization rate measures the proportion of a consultant's available working time that is spent on billable client work. It is typically expressed as a percentage: if a consultant works 40 hours in a week and 30 of those hours are billable, their utilization rate for that week is 75%.

The calculation seems simple, but the definition of "available time" varies between firms - and this variation significantly affects the resulting number. Some firms calculate utilization against all contracted working hours (including annual leave and public holidays). Others calculate it against actual working days. Still others exclude admin time and internal meetings from the denominator. You need to choose a consistent definition and apply it rigorously.

At the firm level, utilization rate is the primary driver of revenue per head - and therefore of overall profitability. Take a firm with 20 consultants, 1,800 available hours each per year, billing at $225/hour. That is 36,000 available hours a year. Moving from 75% to 80% utilization converts 1,800 more of those hours into billable work - $405,000 in additional annual revenue, with no new hires and no rate increase.

This is why utilization rate tracking - accurate, real-time, and visible across the firm - is not optional. It is the foundation of consulting firm management. The standalone cost per billable hour calculator runs the same arithmetic for a whole team at once.

Utilization is also the number that decides what an hour costs you. Jump to the calculator further down to put your own salary, headcount and operating costs through it.

Billable Utilization vs. Resource Utilization

Most consulting firms track two distinct utilization metrics, and it's important to understand the difference.

Billable utilization measures the percentage of time spent on work that is directly billed to clients. This is the revenue metric - the one that determines how much money the firm makes from each consultant's time. Rather than one firm-wide target, compare against your size band: SPI Research measures 65.4% for firms of 10-30 people and 69.2% for 31-100 (2025 benchmark, Table 17, printed p. 34, fiscal 2024).

Resource utilization (or total utilization) measures the percentage of time that is productively used - including internal projects, business development, training, and other non-billable but value-generating activities. This is the capacity management metric - it tells you who is idle and who is overloaded.

A consultant might have 100% resource utilization (fully engaged all week) but only 60% billable utilization (40% of their time went to internal work). Understanding both dimensions is essential. Resource utilization tells you about capacity; billable utilization tells you about revenue efficiency.

Billable Utilization

Billable Hours ÷ Total Available Hours × 100

The primary revenue KPI. SPI Research puts the professional-services average at 66.4% in 2025, and 65.4% for firms of 10-30 people. Directly correlates with revenue per head.

  • Drives revenue per consultant
  • Used for invoicing benchmarks
  • Monthly and quarterly target tracking

Resource Utilization

Productive Hours ÷ Total Available Hours × 100

The capacity management KPI. Includes billable and non-billable productive work. Identifies idle capacity and overallocation.

  • Identifies available capacity
  • Prevents burnout from overallocation
  • Informs new project staffing decisions

What an Hour Actually Costs You

Most firms price an hour at salary divided by a standard year. That number is wrong twice over: you do not bill every hour, and it carries none of the operating costs. This calculator shows the two steps separately and lands on the figure that actually has to be covered - the same calculation SUNAGO Matrix runs per employee.

The figure you use today. Decide whether it includes employer taxes and pension, and be consistent all the way through. Nothing is converted between currencies here - an exchange rate is a number we cannot document for you.

This is the field that moves the result most. Billable employees, not everyone on the payroll: on the example below the difference is 12%. Choose "total employees" and the share below converts it.

Only used when you enter total employees. SPI Research found 71.1% of employees billable in 2024, down from 71.5% in 2023 (printed p. 40, PDF p. 50). That is a separate metric from utilization, which is measured on the billable people.

Either benchmark can be overwritten - type your own measured figure if you have one.

Include the salaries of everyone who does not bill. Leave them out and the cost per hour comes out too low, and the error is invisible because the number still looks reasonable. On the example below, leaving operating costs out entirely gives $53.52 instead of $76.45.

The denominator has to match the benchmark. SPI measures utilization against a fixed 2,000-hour year with holidays and vacation included. Change this to your actually-available hours (1,800, say) and the SPI percentages no longer apply to your figure directly.

Enter what you charge per hour to see the contribution per hour, as a percentage of the rate, and over a year.

Real cost per billable hour

$76.45

2.18× what salary divided by 2,000 hours suggests ($35.00).

20 billable people × 1,308 billable hours = 26,160 billable hours a year.

Step 1

How most firms calculate it

$35.00 per hour

$70,000 salary ÷ 2,000 hours = $35.00

Salary divided by a standard year. This is the number that ends up in most rate cards, and it is the one that is wrong.

Step 2

After utilization

$53.52 per hour

2,000 hours × 65.4% = 1,308 billable hours · $70,000 ÷ 1,308 = $53.52

The salary has to be recovered over the hours that are actually billed, not over every hour in the year.

Step 3

After operating costs

$76.45 per hour

1,308 × 20 people = 26,160 billable hours · $600,000 ÷ 26,160 = $22.94 per hour · $53.52 + $22.94 = $76.45

Rent, systems, admin and the salaries of everyone who does not bill have to be carried by the hours that do.

Two benchmarks, both legitimate

By firm size - 10 - 30 employees

65.4%

SPI Research 2025, Table 17, printed p. 34 (PDF p. 44)

By market - Management consulting

67.4%

SPI Research 2025, Table 169, printed p. 148 (PDF p. 158)

The two disagree by 2.0 percentage points for this firm. That is not an error in the data: they are two legitimate cuts of the same survey, and it is exactly why a single "75% is the target" tells you nothing. Pick the one that describes your firm, and know which one you picked.

If utilization moves

Utilization Cost per hour Difference Over a year
55.4% (-10 pt) $90.25 $13.80 more expensive $305,810 on 22,160 h
60.4% (-5 pt) $82.78 $6.33 more expensive $152,905 on 24,160 h
63.4% (-2 pt) $78.86 $2.41 more expensive $61,162 on 25,360 h
65.4% (your figure) $76.45 - -
67.4% (+2 pt) $74.18 $2.27 cheaper $61,162 on 26,960 h
70.4% (+5 pt) $71.02 $5.43 cheaper $152,905 on 28,160 h
75.4% (+10 pt) $66.31 $10.14 cheaper $305,810 on 30,160 h

The yearly figure is the difference per hour across the billable hours that utilization produces - what it costs to price at the old rate while delivering the new number of hours.

If you are guessing at it

If you are not measuring utilization and are assuming it

Assuming 75% gives $66.67 per hour against a real $76.45.

Assume 75% without measuring it and every hour is priced $9.79 too low. Across 26,160 billable hours that is $256,000 a year of cost that was never covered.

Assuming 85% gives $58.82 per hour against a real $76.45.

Assume 85% without measuring it and every hour is priced $17.63 too low. Across 26,160 billable hours that is $461,176 a year of cost that was never covered.

SUNAGO Matrix runs this per employee, automatically, and uses it in every project's contribution margin. See what it costs.

What Is a Good Utilization Rate for a Consulting Firm?

Benchmarks vary far more by firm size than by role. SPI Research (2025 benchmark, 403 firms, fiscal 2024 data) segments by headcount:

10-30 employees

65.4%

billable utilization (SPI Research, fiscal 2024)

31-100 employees

69.2%

billable utilization (SPI Research, fiscal 2024)

101-300 employees

72.4%

billable utilization (SPI Research, fiscal 2024)

All professional services

66.4%

billable utilization (SPI Research, fiscal 2024)

The pattern runs the opposite way to the one most vendor guides imply: larger firms bill more of their time, not less. SPI's own conclusion is that "the larger PSOs had much higher billable utilization than the smaller, supposedly more nimble consulting firms." (2025 benchmark, printed p. 148) If you run a 25-person firm, 65.4% is your benchmark - not the 75% that circulates online. For the full breakdown by industry and size, see our utilization rate benchmarks guide.

These are benchmarks, not targets. SPI frames 75% as the ambition - "Ideally, billable utilization is over 75%" - so a firm at 65% is on benchmark for its size but has room to improve. At the other end we could find no primary source for a specific burnout threshold, so we do not quote one; what is clear is that very high sustained utilization leaves no slack for professional development, internal projects, or recovery.

The most important number is not the absolute utilization rate - it's the trend. A team whose utilization has dropped from 78% to 64% over three months has a problem that needs addressing. A team steadily improving from 60% to 72% is moving in the right direction. Which other numbers to read it against is covered in consulting firm KPIs. Trend visibility requires consistent, real-time tracking.

Why Small Utilization Gains Have Outsized Revenue Impact

Utilization is a direct multiplier on revenue. Unlike marketing spend or pricing changes, which have variable returns, every percentage point of utilization improvement translates directly into billable hours - and therefore into invoiceable revenue.

Consider a firm with 25 billable staff, each working 1,800 available hours per year at an average billing rate of $225/hour - 45,000 available hours in total. At 70% utilization, the firm generates $7,087,500 in annual revenue. At 75% utilization, the same team generates $7,593,750 - a difference of $506,250 with zero additional headcount.

This is why improving consultant utilization rates is the highest-leverage operational change a consulting firm can make. For benchmark data by industry, role, and firm size, see our utilization rate benchmarks guide.

Scenario: 25 Billable Staff @ $225/hr, 1,800 hrs each

70% utilization$7,087,500/yr
75% utilization$7,593,750/yr
80% utilization$8,100,000/yr

+5% utilization = +$506,250/yr - no new hires needed

Why Utilization Rate Drops - and How to Fix It: 8 Tactics

Each tactic addresses a specific root cause of low utilization. Implement the ones that match your firm's problems - most firms will find 4–5 that apply immediately. For the numbers to measure yourself against, see our utilization rate benchmarks.

Make Forward Capacity Visible to Everyone Who Staffs Projects

Root cause: Managers make staffing decisions blind - they don't know who's available next month. New projects get assigned to whoever is top of mind, not whoever has capacity, or the project drags because no one has been assigned at all.

Fix: A visual resource calendar that shows allocation per person for the coming weeks, across all current and upcoming projects. When a new project is scoped, you can immediately see who can take it without overloading anyone.

Learn more: resource planning for engineering firms

Close the Gap Between Pipeline and Resource Planning

Root cause: Deals close and then staffing scrambles begin. Consultants sit idle between projects because the next engagement wasn't planned in advance. This is the most direct cause of utilization drops - and the most preventable.

Fix: Connect your CRM pipeline to your resource view. Use your CRM's own stage probability - whatever threshold your pipeline data says is reliable - and start soft-allocating resources for deals above it that close within 6 weeks. This eliminates the dead zone between project end and project start.

Set Differentiated Utilization Targets by Role

Root cause: Firms set one blanket target (e.g. 80%) for everyone, which is unrealistic for partners doing BD and too low for junior consultants delivering project work.

Fix: Set the targets in hours per grade, from your own delivery history, rather than borrowing percentage bands with no source behind them. SPI Research documents the shape: senior consultants may bill 500 hours or less a year while junior staff often bill over 2,000. Track against per-grade hour targets, not one firm-wide percentage.

Learn more: utilization benchmarks by role consulting firm KPIs

Track Non-Billable Time by Category - Not Just "Non-Billable"

Root cause: All non-billable time gets dumped into one bucket. You can't improve what you can't see - and "non-billable" tells you nothing about what's actually consuming capacity. As projects grow in complexity, internal coordination, status reporting and admin grow with them.

Fix: Break non-billable into categories: admin, internal meetings, BD/proposals, training, bench (unassigned). If admin and coordination overhead exceeds 15% of a project's total time, investigate the root cause.

Learn more: billable hours tracking

Reduce Time-to-Staff on New Projects

Root cause: After contract signing, it takes 2–3 weeks to assemble a team because skills matching and availability checking is manual. Every day of delay is a day of lost billable time.

Fix: Maintain a live skills database alongside your resource calendar. When a project requires a structural engineer with Revit experience, you should find them in seconds, not days.

Identify and Address Chronic Overservicing

Root cause: Consultants deliver more hours than budgeted on fixed-fee projects. The work gets done, but it's not billable - so utilization looks fine while profitability drops.

Fix: Compare actual hours vs. budgeted hours per project phase in real time. When a phase hits 80% of budget with 60% of work done, flag it immediately before the overrun compounds.

Learn more: project profitability tracking

Make Time Logging Frictionless

Root cause: Consultants forget to log time or misclassify hours because the system is clunky. Your utilization data is wrong, so your improvement decisions are based on fiction - you may think there's a capacity problem when there isn't one.

Fix: Time entry must take under 2 minutes per day. Calendar-based views, default project assignments, and weekly reminders reduce friction. Compare reported utilization against project budget burn rates - significant discrepancies indicate logging issues, not capacity issues.

Learn more: timesheet software for engineering firms

Review Utilization Weekly, Not Monthly

Root cause: Monthly utilization reports mean you discover problems 4 weeks too late. A consultant who sat idle for 2 weeks in March is already lost revenue by the time you see the report in April.

Fix: Weekly 15-minute utilization reviews at the team level. Look at last week's actuals and next 4 weeks' allocations. Catch gaps before they happen, not after they've cost you money.

Learn more: EAC and FAC in project management

How SUNAGO Matrix Tracks Utilization Across Your Firm

The Timesheet in SUNAGO Matrix, which is free for every user, shows utilization as billable hours divided by the hours people had available, per person, team and week. Available hours follow each person's working hours and holidays, and you can export the figures to Excel or PDF.

Allocation and Resources shows you forward capacity - who is booked and who is free per day, week or month, with tentative bookings and a warning before someone is overbooked. When a new project is being scoped, you can see immediately who has capacity to take it on without overloading anyone.

Allocation and Resources also has reports on capacity and utilization, which can be downloaded as a file. Utilization comes from the time people log, so it updates as hours are logged and you always have an accurate picture of where your people's time is going.

Combined with the financial perspective from the project profitability tracking view, utilization data in SUNAGO Matrix gives you the operational picture: how efficiently your team is working, what it's costing, and whether each project is delivering the margin it was sold at. One distinction: the cost per hour in Costs and rates is divided over billable hours worked out from each person's planned utilization, the percentage you set month by month, not from the utilization actually logged.

How SUNAGO Matrix Supports Each Tactic

The tactics above aren't theoretical - they map directly to specific capabilities in SUNAGO Matrix. Here's how the system supports each one.

Allocation and Resources

An overview per day, week or month showing who is booked where, with tentative bookings and placeholders. Spot gaps before they become bench time. Supports Tactics 1, 2, and 5.

Allocation and Resources

Timesheet

Log time with a timer, a week sheet or suggestions from your calendar, on the web or the phone. Free for every user. Supports Tactics 4 and 7.

Timesheet

Utilization per Person, Team and Week

Billable hours against available hours, updated as time is logged, with export to Excel or PDF. Weekly review takes minutes, not hours. Supports Tactics 3 and 8.

Timesheet

Hour Budgets in Project Management

Compare logged hours against the hour budget, with warnings at the limits you choose. Supports Tactic 6.

Project management

CRM and Tentative Bookings

Deals in the CRM pipeline and tentative bookings in Allocation and Resources let staffing begin before a contract is signed. Supports Tactic 2.

CRM

Planned Utilization per Person

In Costs and rates you set a planned utilization per person and month, which drives the cost price per billable hour. Supports Tactic 3.

Costs and rates

Combined, these parts give you a practical utilization improvement toolkit: see where time is going, understand why utilization is low, and take action before gaps become lost revenue. For the full picture of how these tools fit into an integrated consulting ERP, see our guide on ERP for consulting firms.

Frequently Asked Questions

Common questions about tracking and improving utilization rate in consulting firms.

What is a good utilization rate for consultants?

There is no primary source for the per-role percentage bands that circulate online, so we do not publish them. What is documented is the shape: SPI Research notes that senior consultants may bill 500 hours or less a year, while junior staff often bill over 2,000. Set per-grade targets in hours from your own delivery history. For firm-level benchmarks by size, see our utilization rate benchmarks guide.

How do you calculate utilization rate?

Utilization rate is calculated by dividing billable hours by total available hours and multiplying by 100. For example, if a consultant bills 30 hours out of a 40-hour week, their utilization rate is 75%. The key decision is how you define 'available hours' - some firms include holidays and leave, others exclude them.

What is the difference between billable and resource utilization?

Billable utilization measures only client-billable hours as a percentage of available time - it's your revenue metric. Resource utilization includes all productive work (billable plus internal projects, training, BD) - it's your capacity management metric. A consultant can have 100% resource utilization but only 60% billable utilization.

Why is my team's utilization rate dropping?

The four most common causes are: poor resource allocation visibility (managers can't see who has capacity), unbillable project overhead growing unchecked, gaps between project engagements, and inaccurate time logging. Each requires a different operational fix - from real-time allocation views to pipeline-connected staffing.

How often should utilization rate be tracked?

Weekly tracking gives you the operational visibility needed to act on trends before they become problems. Monthly reviews are too infrequent - by the time you see a utilization drop in a monthly report, you've already lost revenue. Real-time dashboards that update as time entries come in are ideal.

What is a realistic utilization rate improvement target?

We found no primary source for how much utilization a firm can expect to recover, so we do not publish a figure. What is reliable is the order of the work: measure accurately first, then close the gaps between engagements, then address the allocation mix. Track your own baseline and improvement rate rather than benchmarking against a number from a vendor guide.

How quickly can utilization improvements show in revenue?

Revenue lags the improvement, and the lag is your billing cycle rather than a fixed number of weeks - we have no primary source for a typical delay. The lag exists because utilization gains must flow through your billing cycle - improved hours this week become invoices next month and cash the month after. The key is consistency: a single good week doesn't move the needle, but 6 consecutive weeks of 5% better utilization creates a measurable revenue uplift.

What is the biggest cause of low utilization in small consulting firms?

Gaps between project engagements. In firms with 10–50 employees, the pipeline isn't large enough to guarantee seamless project-to-project transitions. When a project ends and the next one isn't ready, consultants sit idle until it starts. This bench time is the single largest utilization killer - and it's almost entirely preventable with forward capacity visibility.

Can utilization rate be too high?

Almost certainly, though we could find no primary source that pins a specific threshold - the numbers quoted online trace back to vendor guides citing each other. What is documented is the floor: SPI Research frames 75% as the ambition. Sustained very high utilization leaves no slack for unexpected work, professional development, or recovery, and quality and retention are usually the first things to give. Consultants need time for professional development, internal projects, and recovery. Sustainable utilization balances revenue efficiency with team wellbeing - the goal is consistently hitting targets, not maximizing every hour.

Track Utilization Across Your Entire Firm

SUNAGO Matrix gives you the utilization visibility you need to staff smarter, earn more, and grow sustainably. Start free with Timesheet, and try Allocation and Resources free for 7 days.

Open the live demo

Free. No card needed.